ADAPTIONS MADE TO DECK CRANE A new cabin and putting a new jib head on the boom, were the most eye-catching aspects of a partial overhaul of a Dreggen deck crane for one of our clients. MIT has delivered a more-or-less standard crane...
MIT OPERATIONALIZES TOWER CRANE An almost 40 year old tower crane at a shipyard in Rotterdam was inspected by MIT. The main purpose of this technical inspection was to determine what repairs and adjustments needed to be done to get the crane...
RENOVATION OF THE SCHELDE CRANE The Schelde Crane is being renovated and restored completely by MIT and was returned to the former Marine dock in Vlissingen. Following the City Plan Renovation Schelde Crane MIT has prepared for the Municipality, mayor and aldermen have...
MIT RENOVATES 60 YEAR OLD CRANE BEAM WITH TROLLEY A crane installation with a travelling crab in an old factory in Enschede has been disassembled, completely renovated and reinserted by MIT. The former textile factory in Enschede, Tetem, had a 2-ton crane installation...
SLEW BEARING OF 30-TONS TOWER CRANE REPLACED The slew bearing of approximately 2.75m diameter for a tower crane of 30 tons capacity is delivered and assembled by MIT. Upon inspection the bearing in the lower part of the tower crane construction was found...
MIT MAKES RENOVATION PLAN FOR SCHELDE CRANE MIT has been commissioned by the Municipality of Vlissingen to prepare a plan for the renovation and re-erection of Tower Crane 528-01 of the Schelde Shipyard, now better known as The Schelde Crane. This crane has...
WHEELBOGIES DECK CRANE OVERHAULED MIT has fully overhauled all 4 wheel bogies of a Bailey deck crane on a runway of 90m, on board of a dredger. For this purpose the crane was supported on the port side and the two wheelbogies have...
MIT REPAIRS CRANE IN BRAZIL In the port of Suape in Brazil an expert from MIT was flown-in to recover a crane on a dredger. The ship was stopped for the replacement of a crane arm. Our local specialist managed with local assistance...
E-RENOVATION FOR TOWER CRANE MIT replaced the entire electrical installation of a Bailey tower crane of the late '50s. This made the crane, which after some minor changes still was in very good condition, again up to date according to today’s standards....
BOOM OF TOWER CRANE REPAIRED MIT has provided a new profile for the travelling trolley wheels of a tower crane from the 70's along the entire length. MIT turned the boom of the crane back into its original condition again and managed...
